Anonymous

Flashing headlights,

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
Post Reply
toneinblack
Rust Hunter
Posts: 136
Joined: 06 Oct 2013 14:34
Location: United Kingdom
Contact:

Flashing headlights,

Postby toneinblack » 27 Apr 2014 14:43

Hello all,
picked the tr up a week ago and after having it in the garage for a week with a couple of days off coming up it gives me time to sort a couple of small jobs, first one being is the headlights pop up and work fine with the switch on the dash but not with the indicator arm , so guessing it needs a new arm or is there a separate fuse to check first? Also the car is a 1980 so would any tr7 indicator arm fit?
thanks all
tone.

DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:

Postby DNK » 27 Apr 2014 15:04

Tone- Don't go jumping to conclusions that the stalk is broken.
Most probably a connection .
The fuses are in the cubby


Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants
Image

saabfast
TRiffic
Posts: 1936
Joined: 03 Feb 2006 08:17
Location: Bexhill-on-Sea

Postby saabfast » 27 Apr 2014 16:10

Could be the Pektron unit which operates the flash. TBH the flash is pretty useless as by the time the lights have raised whatever you were flashing has gone.
For the indicator arm you need to check whether yours is on the right or left of the column. Early ones were on the right, later ones n the left. I think they changed around '79 but many cars were registered late.

Alan
Saab 9000 Stg 1 (now passed to son for his family car)
Saab 9000 2.3 FPT Auto (now gone that others might live)
Saab 9000 2.3 LPT Auto (sold on, wish I had it back)
Saab 9-5 2.3 Vector Auto Estate
'81 TR7 DHC
Image

toneinblack
Rust Hunter
Posts: 136
Joined: 06 Oct 2013 14:34
Location: United Kingdom
Contact:

Postby toneinblack » 27 Apr 2014 16:52

thanks for the replies, if a fuse had blown, wouldn't that stop the lights from raising when I flick the dashboard switch? the indicator arm is on the left, so if I ebay an arm after checking earths,fuses then I have to ask if its a left sided arm.
thank you .

DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:

Postby DNK » 27 Apr 2014 17:18

See if you have current through the switch

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants
Image

toneinblack
Rust Hunter
Posts: 136
Joined: 06 Oct 2013 14:34
Location: United Kingdom
Contact:

Postby toneinblack » 27 Apr 2014 17:48

Ive current through the dashboard switch as the lights when I use the switch work fine, they just don't work when I use the arm.

DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:

Postby DNK » 27 Apr 2014 17:54

There is current from both directions on the arm.
Do you have both?

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants
Image

DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:

Postby DNK » 27 Apr 2014 17:59

You have a blue wire to the stalk that carries the current when the light are on there is also a Purple one that carries current to flash them
Is the purple hot
I take it the dip switch is working as therefore the blue has current

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants
Image

jclay (RIP 2018)
TRemendous
Posts: 6027
Joined: 08 Jul 2006 17:13
Location: USA

Postby jclay (RIP 2018) » 27 Apr 2014 18:18

According to the wiring chart, the purple wire take current to the switch and then thru the blue/white wire to operate the motors.

Beware, purple wires on a TR7 are always hot. Door lights, trunk lid light, cigarette lighter, etc.

Clay

[url="http://www.jclay.me/"]My Triumph Site[/url], [url="http://www.triumphtechnical.me"]Technical Stuff[/url], [url="https://docs.google.com/folder/d/0B8MWEvqOpX3udEF4SmFQUW9RS09hbU5uNW5Wd0xrUQ/edit"]My Public Folder[/url],

Cobber
TRemendous
Posts: 2486
Joined: 19 Sep 2005 10:03
Location: Australia
Contact:

Postby Cobber » 27 Apr 2014 23:11

Check the Pektron unit, this little black box acts as a delay to allow the lights to go through the cycle of popping up and flashing without having to hold the dip switch, instead you just need to give it a flick.
For unknown reasons US spec cars don't have this feature.

You'll need to get hold of a non US spec wiring diagram.

Another, quite easy solution is fit some driving lights and flash through them. At least you'll be able to flash your lights in a timely mannor.

"Keep calm, relax, focus on the problem & PULL THE BLOODY TRIGGER"

80'Triumph TR7, 73'Land Rover (Ford 351. V8),
'89 Ford Fairlane
'98 MG-F, 69'Ford F250.

Cobber
TRemendous
Posts: 2486
Joined: 19 Sep 2005 10:03
Location: Australia
Contact:

Postby Cobber » 28 Apr 2014 00:55

I went to the trouble of rebuilding my Pektron unit, there's not much to it.
But found that, as has been mentioned previously in this thread by Saabfast that by the time the damned lights have gotten around to popping up whomever you were attempting to flash is long gone!
So wired up the driving lights to do the flashing.
Here's a pic of my car showing both the driving and fog lights fitted, unobtrusively under the bumper.
Image

"Keep calm, relax, focus on the problem & PULL THE BLOODY TRIGGER"

80'Triumph TR7, 73'Land Rover (Ford 351. V8),
'89 Ford Fairlane
'98 MG-F, 69'Ford F250.

Cobber
TRemendous
Posts: 2486
Joined: 19 Sep 2005 10:03
Location: Australia
Contact:

Postby Cobber » 28 Apr 2014 01:57

Have a look for more info on fitting relays here: [url][/url]http://www.forum.triumphtr7.com/topic.asp?TOPIC_ID=20493

"Keep calm, relax, focus on the problem & PULL THE BLOODY TRIGGER"

80'Triumph TR7, 73'Land Rover (Ford 351. V8),
'89 Ford Fairlane
'98 MG-F, 69'Ford F250.

DNK
TRemendous
Posts: 2711
Joined: 16 Sep 2007 03:49
Location: USA
Contact:

Postby DNK » 28 Apr 2014 11:28

Clay- I took it as the B supplied the power to the stalk AFTER the switch on the dash was flipped.
The P is only for the F to P on the stalks the lights don't need to be on

Don
Stick a Wedge In It
80 TR7 V8 Kick in the pants
Image

toneinblack
Rust Hunter
Posts: 136
Joined: 06 Oct 2013 14:34
Location: United Kingdom
Contact:

Postby toneinblack » 28 Apr 2014 14:37

thanks for the replies, As I have a day off tomorrow Ill reread the advice in this thread and hopefully sort something out.

Post Reply

Who is online

Users browsing this forum: No registered users and 31 guests