Windscreen wiper linkage routing

[macmattom]

<font face="Comic Sans MS"><font size="2"><font color="blue">I am trying to find out if I've routed my windscreen wiper linkage correctly or not - I suspect not [:(]! From the picture below, you can see that I've routed the linkage IN FRONT of where the bonnet striker plate sits, between the bulkhead and the air scoop. However, I suspect the linkage should run in the area behind where the bonnet striker plate sits on and the engine compartment bulkhead.



The wipers work fine, but if the linkage is in the wrong place I would correct that before I proceed. Can anybody help with this and advise me on where their linkage is routed.

Thanks very much,

Mac

</font id="Comic Sans MS"></font id="size2"></font id="blue">

The pheonix rises from the ashes - just give it time!




(two and a half years and counting - but who's counting!!)

http://s733.photobucket.com/albums/ww338/macmattom/

[trv8]

Just had a look at mine and it is routed the same as yours IN FRONT.

[Beans]

You should pay more attention to my weblog, from one of my latest postings [:p]



<center>
<font color="blue"><i>1980 TR7 DHC (my first car, currently being restored)
1981 TR7 FHC Sprint (better known as 't Kreng)</font id="blue">
<b>[url="http://www.tr7beans.blogspot.com/"]<u><b><font size="2"><font color="red">My Weblog</font id="red"></font id="size2"></b></u>[/url]</b></i></center>