Anonymous

Socket?

The all purpose forum for any TR7/8 related topics.
Post Reply
bottomtop
Rust Hunter
Posts: 247
Joined: 30 Oct 2006 01:08
Location: Australia
Contact:
Contact bottomtop

Socket?

Postby bottomtop » 21 Sep 2009 00:51

Howdy all,

Does the brains trust know what size socket I need to get the steering wheel off? All I know is none of my sockets are large enough.

I want to do this when I get the car back from the auto-electrical wizard, to fit the replacement. Its the standard plastic looking wheel,three prong black.

Many thanks.
Top
Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:
Contact Hasbeen

Postby Hasbeen » 21 Sep 2009 02:07

The book says 11/16", but does not say what.

I use a 1 1/8 UNF socket, which is slightly loose on the nut, & just
goes into the hole in the wheel, but works OK.

The book says 37 LBS FT, which is low for such a size. I use even
less, only about 15 LBS, as over tightening makes it too hard to get
the wheel off again.

Hasbeen
Top
PeterTR7V8
TRemendous
Posts: 2914
Joined: 10 Jun 2008 02:22
Location: New Zealand
Contact:
Contact PeterTR7V8

Postby PeterTR7V8 » 21 Sep 2009 02:11

It isn't an exact fit but a 1 1/8 tube socket works for me. It is a bit loose so that probably means a 28mm will be a good fit.

Image
Never say die. At least not while you're still breathing.
Top
TR7Aaron
Wedge Pilot
Posts: 334
Joined: 16 Feb 2008 01:01
Location: USA
Contact:
Contact TR7Aaron

Postby TR7Aaron » 21 Sep 2009 02:45

Loosen the nut but don't remove it - leave it on the last few threads. Grab the steering wheel and muscle it off - mine came off much easier than I think it should. Leaving the nut on there will stop the wheel from bashing you in the face when it comes loose.

Aaron
1976 TR7 FHC (an ongoing project)
Image
Top
PeterTR7V8
TRemendous
Posts: 2914
Joined: 10 Jun 2008 02:22
Location: New Zealand
Contact:
Contact PeterTR7V8

Postby PeterTR7V8 » 21 Sep 2009 02:52

Good tip Aaron. Looks like I've been putting my crash helmet on unnecessarily all this time! [:D]

There is always a better way.

Image
Never say die. At least not while you're still breathing.
Top
bottomtop
Rust Hunter
Posts: 247
Joined: 30 Oct 2006 01:08
Location: Australia
Contact:
Contact bottomtop

Postby bottomtop » 21 Sep 2009 04:04

Thanks for the info - and the safety tips!
Top
Beans
TRemendous
Posts: 7823
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:
Contact Beans

Postby Beans » 21 Sep 2009 09:28

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by PeterTR7V8</i>

... so that probably means a 28mm will be a good fit...<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Make that 27mm and you're spot on [;)]

<center>Image
<font color="blue"><i>1981 TR7 FHC Sprint (better known as 't Kreng)
1980 TR7 DHC (my first car currently being restored)
In parts a 1980 TR7 PI DHC, 1981 TR7 DHC, 1981 TR7 FHC</font id="blue">
<font color="red">http://tr7beans.blogspot.com/</i></font id="red"></center>
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 65 guests

cron