big brown truck came to my house today.....

[silverseven]

<font color="brown">And left me a package from Woody.....</font id="brown">








looks like I've got some work to do now [:D]






Ron.

[tr8]

Well gitter done.

[pupinabox]

I love that truck...

[IMG=left]http://i160.photobucket.com/albums/t194/pupinabox/353.jpg[/IMG=left][IMG=right]http://i160.photobucket.com/albums/t194/pupinabox/tr7005.jpg?t=1271517043[/IMG=right]

[silverseven]

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by tr8</i>

Well gitter done.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

i've got two weeks 'till the show in Hudson...(lots of time [B)][;)])

Ron.

[FI Spyder]

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by silverseven</i>


i've got two weeks 'till the show in Hudson...(lots of time [B)][;)])
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Always nice to get "presents". That two weeks will fly.... start now! Two weeks to my Van Dusen show. Still turning the nails in my gas tank. Epoxy slowing disolving. Getting the rust too. The Metalready will only have to etch the tank when I'm done. 4 days to cure sealer. I'm starting to feel under the gun. [:p]



TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra

[Bendder]

Let me know if you feel like doing a beer and wrenchin' night. I'll drink you wrench! No just kidding but I could be convinced, let me know.



Mark
1977 TR7 FHC
1978 TR7 FHC
1980 TR7 DHC
1980 Rover SD1 4.0L

[silverseven]

thanks for the offer Mark....I'm going to use some of the down time at the shop to get a few things done....

Spyder the car will be out of storage Sunday, my workplace is 2 minutes from home.

All I need to get completed for the Hudson meet is the clutch hydraulics so the car can be mobile. [;)] While my goal is to get at least the front end completed, honestly the suspension and brake work is not important as the meet is about 10 minutes away...


Mark, you make sure you get your car ready ....I hope you can get the Ottawa groupe down for a drive!!

Ron.

[Bendder]

Yup, car is ready to go running well. Just the fuel gauge to sort always reading empty. Been covered before by many people so lots of usfull posts to help sort it just the time that's missing. We will be leaving from Orleans just outside Ottawa at 8:00am and taking the scenic route along the river for a projected arrival of about 10:00-10:30am



Mark
1977 TR7 FHC
1978 TR7 FHC
1980 TR7 DHC
1980 Rover SD1 4.0L

[Hasbeen]

You are going to spend some time, thundering around corners are you
then Ron? Good on you.

We had a little white van arive monday morning, with a ported
manifold, & plenum for the 8, along woth a Mallory high performance
ignition system. Should be good for thundering.

All this because my son was home for a few days, & we found the
vacume advance on the 4.6L distributor was allowing air through, &
not working. He rang Triumph Rover Spares for a replacement, as the
disy is one of theirs.

Being a youth, [sort of still] replacement was not good enough, &
he'd spent much money, by the time he put the phone down.

Sorry, I don't have a camera, but will report if it goes any harder.

Hasbeen

[silverseven]

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Bendder</i>

We will be leaving from Orleans just outside Ottawa at 8:00am and taking the scenic route along the river for a projected arrival of about 10:00-10:30am
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

I will be there rain or shine, hopefully early for once [B)]

Ron.