Anonymous

Plain cam cover - no "TRIUMPH"?

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
Post Reply
Graham Robertson
Wedge Pilot
Posts: 384
Joined: 15 Mar 2007 19:37
Location: United Kingdom
Contact:

Plain cam cover - no "TRIUMPH"?

Postby Graham Robertson » 03 Aug 2015 22:52

Got this at a local scrap yard:

Image

Graham

FI Spyder
TRemendous
Posts: 8920
Joined: 03 Jul 2006 19:54
Location: Canada

Re: Plain cam cover - no "TRIUMPH"?

Postby FI Spyder » 04 Aug 2015 01:12

Would that be from a Saab?
- - -TR7 Spider - - - 1978 Spitfire- - - - 1976 Spitfire - - 1988 Tercel 4X4 - Kali on Integra - 2013 Volt - Yellow TCT

REPLIC8
Wedgista
Posts: 1204
Joined: 07 Jul 2008 20:03
Location: United Kingdom
Contact:

Re: Plain cam cover - no "TRIUMPH"?

Postby REPLIC8 » 04 Aug 2015 07:52

My cam cover doesn't have Triumph stamped in it. There are a few about.
Image

Andy
1981 Triton Green TR7 FHC (low mileage standard Solihull car)
1980 Inca Yellow TR7 FHC (awaiting restoration/upgrading)

seven
Swagester
Posts: 907
Joined: 01 Jun 2010 17:21
Location: United Kingdom
Contact:

Re: Plain cam cover - no "TRIUMPH"?

Postby seven » 04 Aug 2015 10:38

Maybe part of BL's secret experiments or Triumph Stag covers??
Dodge Dakota 4x4 '05
Triumph TR7 DHC '81
Triumph 2.5 Estate '73
Triumph 2.5PI Saloon '69
Triumph Herald 12/50 '65
Mercedes SL55 AMG '02
Mercedes E320 '05
Mitsubishi Canter '01
Rolls Royce Silver Shadow '76
Fiat Ducato Motorhome '03


The car is unable to handle my driving capabilities

Stevie P
Rust Hunter
Posts: 222
Joined: 23 Sep 2013 06:29
Location: United Kingdom
Contact:

Re: Plain cam cover - no "TRIUMPH"?

Postby Stevie P » 04 Aug 2015 12:52

I had a Stag that had Triumph on both rocker covers.

Steve

mak
Wedge Pilot
Posts: 313
Joined: 26 Oct 2005 15:23
Location:
Contact:

Re: Plain cam cover - no "TRIUMPH"?

Postby mak » 04 Aug 2015 20:25

Have one on the car at the moment. Are they only on late cars, e.g did the tooling for the 'triumph' bit wear out so they just milled it off?

Post Reply

Who is online

Users browsing this forum: No registered users and 59 guests