Anonymous

Slave Cylinder Question..

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
Post Reply
FI Spyder
TRemendous
Posts: 8910
Joined: 03 Jul 2006 19:54
Location: Canada

Postby FI Spyder » 14 Dec 2008 04:23

If by clip on clutch arm you mean the clips that hold the clutch/brake pivot rod on the pedal box, I use a wrench see below (used on rear brake cylinders).

Image

If by "stuck in neutral" you mean you can't shift into gear when the engine is running it means the clutch is not releasing. If physically not moving check under the car at rear of transmission where the pin goes in the "eye" to see if motion is being transfered.

TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra
Image
Top
jclay (RIP 2018)
TRemendous
Posts: 6027
Joined: 08 Jul 2006 17:13
Location: USA

Postby jclay (RIP 2018) » 14 Dec 2008 08:52

Welcome to the Forum!

Is this the clip that you are referring to?

Image

One catch on the clip goes in the big hole and the other end of the clip catches on the end of the clutch arm.

More information here: http://web.mac.com/jclaythompson/iWeb/Site/Welcome.html

Have fun, drive fast & safe, be kewl,

jclay
Image
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 70 guests