dursleyman wrote:Surely that bottom bolt goes straight through the timimg cover into the block. I am not at home to take one out and measure it but easy to just sort though your 5/16 UNF bolts and find one long enough.
Thanks Russ, yes, it does go through the timing cover and needs to be about 2 inches I think, but what is throwing me is that the parts book clearly shows a 1 inch bolt in that position, hence the confusion.
2C 06R HU808 SCREW 5/16 UNF X 1 INCH
1
£0.62
Ex VAT @ 20%
£0.52This is the only TR7 I've worked on and I took it to bits about 20 years ago and didn't take enough pictures so I'm attempting to carefully reassemble by cross checking each part against the factory parts book as I go..... I mean, what could possibly go wrong !
cheers
Dan