Anonymous

Wiring bodges

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
Post Reply
Rich K
Wedge Pilot
Posts: 291
Joined: 08 Aug 2015 18:04
Location: Worcester, United Kingdom

Wiring bodges

Postby Rich K » 31 Oct 2021 09:15

Hi,

Just started getting into the electrics on the V8 conversion. It looks like the previous owner was fond of the dreaded scotch lock connectors and other equally dubious connection techniques. I have a number of spare looms in my stash so it looks like I will be swapping out some of the loom sections for ones in better condition. That will also give me the opportunity to add or modify the wiring where necessary for the V8 installation.

Cheers, Rich.
Attachments
990DAF9A-4DE5-47A9-833C-500E322FE378.jpeg
990DAF9A-4DE5-47A9-833C-500E322FE378.jpeg (138.66 KiB) Viewed 5098 times
1980 TR7 drophead now repainted and started refitting plus V8 upgrade
1977 TR7 fixedhead awaiting restoration
1981 TR7 drophead bodywork and mechanicals now done, completing trim currently.
Ford Ranger Wildtrak
Jaguar XKR Supercharged

CamGTS
Scuttle Shaker
Posts: 86
Joined: 05 Feb 2020 08:45
Location: Edinburgh

Re: Wiring bodges

Postby CamGTS » 31 Oct 2021 09:56

not as bad as mine was - wires wound together and a bit of insulating tape :( :(
Cam

1948 Ferguson TEA20
1978 Chrysler Sunbeam 1300 LS
1979 Talbot Sunbeam Lotus
1981 Triumph TR8 (TR7V8)
1991 Peugeot 205 GTi 1.9
2004 Renault Sport Clio 182
2011 Porsche 911 GTS
2016 Porsche Macan GTS

Cobber
TRemendous
Posts: 2481
Joined: 19 Sep 2005 10:03
Location: Australia
Contact:

Re: Wiring bodges

Postby Cobber » 31 Oct 2021 11:08

they should be bloody wellhorsewhipped of buggering wiring like that!
"Keep calm, relax, take a deep breath, focus on the problem & PULL THE BLOODY TRIGGER"

'80 Triumph TR7.
'97 Ford Falcon Longreach 'S' ute,
'98 MG-F.
'83 Jaguar XJ6 Sovereign S3.

stevie_a
TRemendous
Posts: 3325
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

Re: Wiring bodges

Postby stevie_a » 31 Oct 2021 12:40

Doesn't look too bad, this is what i got when i started stripping the dash
Attachments
20200403_140129.a76ef047d8d24c03823acdf41c4ee7c8.jpg
20200403_140129.a76ef047d8d24c03823acdf41c4ee7c8.jpg (231.66 KiB) Viewed 5091 times
If it's not broke don't fix it.

Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:

Re: Wiring bodges

Postby Hasbeen » 31 Oct 2021 13:39

The TR8 was put together by a well respected shop in Melbourne. 15 years later we are still finding dodgy systems as they fail. Went for a run the other night about 1.00AM after doing some fuel hose replacement.

Way out here in the bush there is not much traffic at night, & no street lights, so it was lucky it was a moonlight night when the head lights went out about 3 kilometres from home. I'll probably get to have a look at it before Christmas, so a daylight only car for a while.

Hasbeen

Rich K
Wedge Pilot
Posts: 291
Joined: 08 Aug 2015 18:04
Location: Worcester, United Kingdom

Re: Wiring bodges

Postby Rich K » 31 Oct 2021 18:57

It seems that wiring bodges by previous owners comes with the territory with our wedges! I seem to recall there was a wiring fire issue with the dash loom on early cars from the factory even before any over enthusiastic amateur auto electricians got there hands on the cars. :shock:
1980 TR7 drophead now repainted and started refitting plus V8 upgrade
1977 TR7 fixedhead awaiting restoration
1981 TR7 drophead bodywork and mechanicals now done, completing trim currently.
Ford Ranger Wildtrak
Jaguar XKR Supercharged

Beans
TRemendous
Posts: 7788
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:

Re: Wiring bodges

Postby Beans » 31 Oct 2021 21:19

When I restored my Sprint powered FHC I managed to remove a decent sized cardboard box full of non standard wires added by the previous owners.
It took me two full weeks work to strip the looms and repair/replace all the Scotch Lock fire starters :roll:
Image
1976 TR7 FHC (currently being restored ...)
1980 TR7 DHC (my first car, a.k.a. Kermette)
1981 TR7 FHC (Sprint engined a.k.a. 't Kreng)

http://www.tr7beans.blogspot.com/

busheytrader
TRemendous
Posts: 3145
Joined: 14 Oct 2007 17:49
Location: United Kingdom
Contact:

Re: Wiring bodges

Postby busheytrader » 02 Nov 2021 19:49

Bloody scotchlocks are only good for so long before the connections corrode, I never use them.

My wiper speeds fell back to a crawl thanks to a cut wire and twisted wire connections under masking tape.

The park switch must have moved causing non stop wiper action. Instead of finding it behind the motor and readjusting it, the PO worked their magic close to the stalks and bypassed the park switch. The wipers would park wherever they were when I switched them off. The twisted connections gradually lost their connectivity until the wipers barely moved across a wet screen.

Post Reply

Who is online

Users browsing this forum: No registered users and 23 guests