Anonymous

Timing cover refitting

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
Post Reply
tr7dan
Rust Hunter
Posts: 117
Joined: 18 Jun 2009 22:53
Location: United Kingdom
Contact:

Timing cover refitting

Postby tr7dan » 18 Oct 2021 14:20

1980 TR7 dhc

Could anyone tell me where the fibre washer fits on the timing cover centre bolt ?

The parts book seems to suggest it fits BETWEEN the timing cover and engine block and indeed the centre boss is slightly lower than the machined gasket surfaces when checked with a straight edge, however, the workshop manual says that the fibre washer fits under the centre bolt head ?

dursleyman
TRiffic
Posts: 1571
Joined: 11 Jun 2007 22:55
Location: United Kingdom
Contact:

Re: Timing cover refitting

Postby dursleyman » 18 Oct 2021 16:52

Under the bolt head, between the plain washer and the timing cover
Attachments
timing_cover_2_2_60.png
timing_cover_2_2_60.png (71.59 KiB) Viewed 3248 times
Russ

1981 TR7 Sprint DHC & 1977 TR7 Sprint FHC
Dursley
UK

http://tr7russ.blogspot.co.uk/

Image Image

tr7dan
Rust Hunter
Posts: 117
Joined: 18 Jun 2009 22:53
Location: United Kingdom
Contact:

Re: Timing cover refitting

Postby tr7dan » 18 Oct 2021 17:27

Ok, thanks for that.

I just rechecked and the thickness of the fixed chain guide backplate accounts for the recessed centre boss - moral is, look twice... :oops:

cheers

Dan

Post Reply

Who is online

Users browsing this forum: No registered users and 53 guests

cron