Anonymous

Fuel Hose internal diameter

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
Post Reply
MikeRotherham
Rust Hunter
Posts: 142
Joined: 25 Nov 2011 15:56
Location: United Kingdom
Contact:
Contact MikeRotherham

Fuel Hose internal diameter

Postby MikeRotherham » 11 Apr 2017 12:10

Could anyone give me the correct internal diameter of the fuel pipe on our cars?
I'm wanting to replace the fuel pipe between the main feed pipe and the fuel pump.
Rimmers are selling 1/4" diameter but I've also read 8mm mentioned elsewhere or does the slight difference not matter?
Best place to get it and avoid the poor quality stuff that is around?
Thanks
Mike.
Top
REPLIC8
Wedgista
Posts: 1204
Joined: 07 Jul 2008 20:03
Location: United Kingdom
Contact:
Contact REPLIC8

Re: Fuel Hose internal diameter

Postby REPLIC8 » 11 Apr 2017 18:32

You need 8mm for the feed pipe to pump, and pump to fuel rail. 6mm for fuel rail to carbs. I buy it from eBay.
Image

Andy
1981 Triton Green TR7 FHC (low mileage standard Solihull car)
1980 Inca Yellow TR7 FHC (awaiting restoration/upgrading)
Top
FI Spyder
TRemendous
Posts: 8910
Joined: 03 Jul 2006 19:54
Location: Canada

Re: Fuel Hose internal diameter

Postby FI Spyder » 11 Apr 2017 20:16

I get mine from local auto parts dealer. Being FI, I get high pressure hose which is pretty cheap (not the expensive direct injection hose) and if you have alcohol in your gas, make sure it's alcohol resistant.
- - -TR7 Spider - - - 1978 Spitfire- - - - 1976 Spitfire - - 1988 Tercel 4X4 - Kali on Integra - 2013 Volt - Yellow TCT
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 54 guests

cron