Page 1 of 1
Tips on installing door cards
Posted: 23 Mar 2014 15:38
by MikeRotherham
Hello,
I was wondering if any one had any tips when installing door cards.
I've had preliminary fitting session for the door cards. They are not originals but reproduction ones.
Couldn't get all the snap fasteners to line up. Have others had a problem with this?
Regards
Mike
Posted: 23 Mar 2014 17:34
by nick
I fitted new ones not too long ago and it was pretty straight forward. Had to cut the cloth out for the window crank and I think the ash tray hole was a bit of fight but other than that it all lined up well.

[img][IMG]http://i615.photobucket.com/albums/tt234/nickmi/TR7%201975/Yellow.jpg[/img]
nick
'79 TR7 DHC
'76 TR7 FHC
Posted: 23 Mar 2014 21:35
by supercass
You have to push the clips well into the slot provided. Sometimes there is a piece of the overfolded vinyl that gets in the way and needs to be trimmed off. supercass
Posted: 23 Mar 2014 22:06
by FI Spyder
Didn't have any problems with VB upgraded ones.
- - -TR7 Spider - - - 1978 Spitfire- - - - 1976 Spitfire - - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra - Yellow TCT

Posted: 28 Mar 2014 18:49
by MikeRotherham
Thanks for your replies and suggestions.
The weather looks like it should be reasonable this weekend.
I'll have another go at the door cards.
Mike.