Page 1 of 1

Pop up lights

Posted: 23 Sep 2013 17:17
by Duplio7
Hi Guys. Seems I need a new motor for the passenger light pod. I see there are 2 types, one with a square electrical socket plug, and one with a round electrical socket plug. Now this does not bother me, since a previous owner took it upon himself to cut them off, and replace each wire with it's own connector. What I'd like to know, is will either motor do me, for I would simply cut off the plug and give each wire a separate plug. So the question is, are the motors the same barring the type of connector plug, or am I going to have to work out which type of plug I need, type of motor?

This never happened to the other fellah...!

Posted: 23 Sep 2013 19:37
by john 215
Hi,

When I brought my FHC the gent included a couple of spare headlamp motors, they were the later plug type, I simply cut off and soldered the early plugs as nec and they work fine.

In fact once upon a time you could buy adaptor leads for using late motor on a early car.


Cheers John

ImageImageImage Image
LIVE LIFE A QUARTER OF A MILE AT A TIME!

1976 Speke FHC Beauty

1979 3.5 FHC(STATUS PENDING!!)

1982 2.0 DHC NOW A 4.6, BUILT NOT BROUGHT !!!!

Posted: 24 Sep 2013 06:41
by Duplio7
So John, the motor is the same it's just the plugs which are different, and the motor will connect to the lifting gear?

This never happened to the other fellah...!