Page 1 of 1
Door wiring harness sheath.
Posted: 10 Oct 2012 14:46
by j.johnson23
Hello again,does anyone know the proper name for the corrugated rubber sheath between door and A pillar that the wiring runs through,i`ve lost one of mine and need to order another.
Cheers.
Posted: 10 Oct 2012 18:02
by FI Spyder
Probably Door harness protector sheath. No longer available according to Rimmers. Might have to get a used one from auto wreckers or Robsport/S&S.
- - -TR7 Spider - - - 1978 Spitfire- - - - 1976 Spitfire - - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra - Yellow TCT
Re: Door wiring harness sheath.
Posted: 19 Feb 2025 23:49
by Tjmitch
I’m trying to refit (without success!) the corrugated rubber door harness sheath after respraying and refitting my doors. They were hard enough to extract but seem almost impossible to insert back in the small holes in the door and door pillar, especially when I have the door loom passing through.
Does anymore have any tips? The longer I try the more frustrated I get!
Re: Door wiring harness sheath.
Posted: 23 Feb 2025 20:50
by Beans
What model year is your car?
There is a difference between early and late cars.
Especially the diameter for the holes!
Re: Door wiring harness sheath.
Posted: 25 Feb 2025 09:29
by Rich K
I had the same problem on the gold car. Eventually managed to fit them using brute force and the end of a screwdriver to compress the rubber flange inwards. All becomes clear now Beans has clarified that there are two sizes. I should have looked more closely when I was digging them out from my spares stash.