Anonymous

Procedure for coolant flush...

Here’s where to discuss anything specific about your standard(ish) car or something that applies to the model in general.
Post Reply
Sean Roth
Scuttle Shaker
Posts: 54
Joined: 29 Dec 2013 01:28
Location:
Contact:

Procedure for coolant flush...

Postby Sean Roth » 17 Jul 2014 06:09

Wondering how you all have changed your coolant on a car without the removable cap above the thermostat housing??

Any certain procedure? I can drain it easy but refilling may be a chore. I just don't want to have too much air in the system and burn anything.

SF Roth

Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:

Postby Hasbeen » 17 Jul 2014 07:34

Don't forget to take the bung out of the block, & flush it out through there as well.

When refilling after draining, I fill the header tank as usual. When that is full, I remove the radiator hose from the thermostat housing, bend it up a bit, & fill to the top through there.

Hasbeen.

Post Reply

Who is online

Users browsing this forum: No registered users and 34 guests