Small subframe spacers.

[Dave Dyer]

Firstly, Happy New year to you all.

My question is, does anyone know the length of the smaller tube like spacers that are used in the subframe mounting?

They are the straight tube spacers, not the ones with the lip on. There are 2 longer and 2 shorter.

I thought if I knew the sizes, I could cut them from a piece of tube.
Outer diameter and inner diameter would also be good to know?

Thanks,
Dave

[busheytrader]

When I changed to Polybushes a few years I bought these tube spacers from Robsport. Previously they weren't available for a long time.

They weren't that cheap since they were machined from solid.

Adam





TR7 V8 DHC Jaguar Solent Blue. 9.35cr Range Rover V8, Holley 390cfm, JWR Dual Port, 214 Cam, Lumention, Tubular Manifolds, S/S Single Pipe Exh, 3.08 Rear, 200lb Spax & PolyBushes all round, Anti- Dive, Strut-Top Roller Bearings, Capri Vented Discs & Calipers, Braided Hoses, 4 Speed Rear Cylinders, Uprated Master Cylinder & Servo, AT 14" 5 Spokes or Maestro Turbo 15" Alloys, Cruise Lights, S/S Heater Pipes, Replacement Fuel Tank. No Door Stickers. Mine since July 1986, V8 from 1991 courtesy of S&S V8 conversion and big brake kits.

[jclay (RIP 2018)]

Beans has a diagram of the front spacers and the way they fit.

Clay

[url="http://www.jclay.me/"]My Triumph Site[/url], [url="http://www.triumphtechnical.me"]Technical Stuff[/url], [url="https://docs.google.com/folder/d/0B8MWEvqOpX3udEF4SmFQUW9RS09hbU5uNW5Wd0xrUQ/edit"]My Public Folder[/url],

[Dave Dyer]

Just an update,

I bought the spacers from S+S in the end, they were a good price, it just wasn't worth trying to make them.

The short ones are 19mm high and the longer ones 29mm high, just for future reference.

Dave