Strut Brace

[Henry]

I have contacted Glen Oliver about the possible manufacture of a small batch of strut braces to the design shown (for a V8 with Holly type carb) in the attached photo.
Glen makes these on a jig, they can be made to suit most engine/carb variants.
They are made from stainless steel so not only do they aid in the rigidity of the front suspension they also look good.
A budget cost will be provided when we have some idea of quantities, please respond here if you are interested.

[dursleyman]

Yes please.

DHC with Sprint engine and SU carbs.

[tr8]

I am interested in what you had to do to the air scoop to make it fit behind the 14 inch air cleaner. Doesn't look like a lot of clearance on my car. I also am running a 14 inch air cleaner.

[john 215]

Hi,

Got one and works a treat





Cheers John

[supercass]

Would be interested in one for a standard 2 litre (with double bulge bonnet) but I guess the cross beam would be an entirely different shape. supercass

[Henry]

Thanks to all those that have responded, especially John 215 for his additional photo. I plan to let this stand for about a week to give folks chance to see what is offered and to gather all the questions for Glen to respond to.

[john 215]

Hi Henry,

No problem mate, say hello to Glen from me, he is a top bloke IMHO,

Cheers John

[moestr7v8]

Hi Henry
Glad to see you contacted Glen as John says he is a top bloke and if you do buy one of his strut braces I can assure you, you will be impressed with the quality and accuracy.
I have tried to put some photos of mine on here but I can't seem to succeed
Cheers
Moe

[Henry]

LOL, cheers Moe! I just followed your instructions...
I've sent a link to this thread for Glen to follow, as he needs to see whats going on if he's going to make them

[bonnietiler]

I'm running an edelbrock and would be interested in the brace for sure.
Bonnietiler

[tr8]

I am interested in a strut bar

[simontdo]

I'd be interested, so count me in please.

[richards]

Another request for a brace for a sprint on su's.

[DutchTriumph]

I would like one for a 4-cilinder car . It would be nice if it can be removed, without loosening the struts.

[DNK]

One for a Rover FI?