Anonymous

Bits on my list to make

Too many people duplicate work that others already have done ... if you're having something remade then tell us about it! Success and Disasters, they are all useful to know about!
Post Reply
mak
Wedge Pilot
Posts: 313
Joined: 26 Oct 2005 15:23
Location:
Contact:

Bits on my list to make

Postby mak » 15 Jul 2015 12:12

These are the things I am probably going to be making myself for mine:

Alloy T bolts for FHC B post grilles.
Alloy heater knobs. (you can get plastic)
Spun stainless alloy wheel centres
Stainless plates for rear of head lamp fixings.
Adapting alloy funnel to fit aero type fuel filler with pipe similar to original. (not really needed, but directs petrol into tank and not onto joint of tank/pipe, doesn't include breather pipe.)
Alloy Carb mounts using Weber type o rings and anodised black.

Maxwell
TRiffic
Posts: 1641
Joined: 19 Jun 2008 21:30
Location: United Kingdom
Contact:

Re: Bits on my list to make

Postby Maxwell » 15 Jul 2015 13:10

Mak - I believe the correct T-Bolts are now back in stock at Rimmers....

Maxwell :D
3.5 TR7 DHC \ Current :D 8)
2.0 Mazda MX5 Sport

Image

mak
Wedge Pilot
Posts: 313
Joined: 26 Oct 2005 15:23
Location:
Contact:

Re: Bits on my list to make

Postby mak » 18 Jul 2015 17:41

Thanks Maxwell!

navydiver
Wedgling
Posts: 15
Joined: 20 Apr 2012 12:08
Location: San Diego, USA

Re: Bits on my list to make

Postby navydiver » 20 Jul 2015 23:02

I think the carb mounts are available through the dolomite club but you have to be a member to order. Maybe we need to do an inter club deal with them?
Rob Cornick
1975 TR7 FHC Ca Spec ACL 4 spd
1977 TR7 FHC ACW 5Spd
1978 TR8 FI DHC ACT 5spd
1980 TR7 FI DHC Spider
1980 TR7 FI DHC Spider
1980 TR7 FI DHC Spider
1980 TR7 FI DHC

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests