Anonymous

I was at the Haynes museum

Do you have a question? Ask it here! The reference library for all your DIY instruction guides, aka ‘surely there must be an easier way of doing this’.
Post Reply
stevie_a
TRemendous
Posts: 3323
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

I was at the Haynes museum

Postby stevie_a » 06 Aug 2022 21:14

Hi all
As title said I was at the Haynes museum today, as it is normally over 400 miles from my house, I am down here on holiday in Bath, my good lady thought it was to good an opportunity to go.

So we went today, and yes there was a TR8 but it had I think a Mark Grinnall conversion to a 2+2, do we know anything about this car ?
I also note it had an unusual T Bar roll bar ( i am thinking this was to add strenth that was lost woth the 2+2 conversion?
Attachments
1.jpg
1.jpg (52.81 KiB) Viewed 2951 times
2.jpg
2.jpg (59.85 KiB) Viewed 2951 times
3.jpg
3.jpg (64.03 KiB) Viewed 2951 times
If it's not broke don't fix it.

stevie_a
TRemendous
Posts: 3323
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

Re: I was at the Haynes museum

Postby stevie_a » 06 Aug 2022 21:15

Also the pic of the back seat
Attachments
6.jpg
6.jpg (36.68 KiB) Viewed 2950 times
If it's not broke don't fix it.

stevie_a
TRemendous
Posts: 3323
Joined: 19 Jun 2005 10:28
Location: Glasgow'ish

Re: I was at the Haynes museum

Postby stevie_a » 06 Aug 2022 21:19

Also as i was driving into Bath i seen a Gold DHC, a few days later seen it again as i was on a bus and managed a quick photo.

Is it anybody on here?
Attachments
8.jpg
8.jpg (71.15 KiB) Viewed 2950 times
If it's not broke don't fix it.

Rich K
Wedge Pilot
Posts: 290
Joined: 08 Aug 2015 18:04
Location: Worcester, United Kingdom

Re: I was at the Haynes museum

Postby Rich K » 08 Aug 2022 09:01

Hi, looks similar to the T bar arrangement on the Broadside in the Gaydon collection.
Attachments
34F1AACD-545D-4B13-8989-41A2F3F4099A.jpeg
34F1AACD-545D-4B13-8989-41A2F3F4099A.jpeg (182.79 KiB) Viewed 2926 times
1980 TR7 drophead now repainted and started refitting plus V8 upgrade
1977 TR7 fixedhead awaiting restoration
1981 TR7 drophead bodywork and mechanicals now done, completing trim currently.
Ford Ranger Wildtrak
Jaguar XKR Supercharged

FI Spyder
TRemendous
Posts: 8915
Joined: 03 Jul 2006 19:54
Location: Canada

Re: I was at the Haynes museum

Postby FI Spyder » 08 Aug 2022 16:00

Not a very elegant solution, rusty bolt heads sticking out of the top.
- - -TR7 Spider - - - 1978 Spitfire- - - - 1976 Spitfire - - 1988 Tercel 4X4 - Kali on Integra - 2013 Volt - Yellow TCT

Cobber
TRemendous
Posts: 2479
Joined: 19 Sep 2005 10:03
Location: Australia
Contact:

Re: I was at the Haynes museum

Postby Cobber » 08 Aug 2022 22:51

FI Spyder wrote:Not a very elegant solution, rusty bolt heads sticking out of the top.

Whilst l agree to it being inelegant, I’d like to think that the bolt heads weren’t rusty when new! :lol:
"Keep calm, relax, take a deep breath, focus on the problem & PULL THE BLOODY TRIGGER"

'80 Triumph TR7.
'97 Ford Falcon Longreach 'S' ute,
'98 MG-F.
'83 Jaguar XJ6 Sovereign S3.

Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:

Re: I was at the Haynes museum

Postby Hasbeen » 10 Sep 2022 13:30

The T would be very useful in a TR7/8 convertible. It is a very flexible motorcar.

Apply 300 BHP to the rear of the thing & you can see the back of the passenger door drop a little below it's static shut line. I have no doubt the drivers door is raised at the rear.

My son tells me when I go "finish" he will transfer all the performance gear from the 8 to the 7 fixed head, which could handle the torque more easily.

Hasbeen

seven
Swagester
Posts: 905
Joined: 01 Jun 2010 17:21
Location: United Kingdom
Contact:

Re: I was at the Haynes museum

Postby seven » 17 Sep 2022 12:10

Hasbeen wrote:The T would be very useful in a TR7/8 convertible. It is a very flexible motorcar.

Apply 300 BHP to the rear of the thing & you can see the back of the passenger door drop a little below it's static shut line. I have no doubt the drivers door is raised at the rear.

My son tells me when I go "finish" he will transfer all the performance gear from the 8 to the 7 fixed head, which could handle the torque more easily.

Hasbeen


Oh, what a charming Lad Hasbeen.........Great idea though :mrgreen:
Triumph TR7 DHC '81
Triumph 2.5 Estate '73
Triumph 2.5PI Saloon '69
Triumph Herald 12/50 '65
Mercedes SLK250 '14
Mercedes SL55 AMG '02
Mercedes E320 '05
Mitsubishi Canter '01
Rolls Royce Silver Shadow '76
Volvo 262c '78
Fiat Ducato Motorhome '03
Kawasaki GPZ '93
Kawasaki GPZ '92
The car is unable to handle my driving capabilities

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest