Anonymous

Body/ pannel seams

Do you have a question? Ask it here! The reference library for all your DIY instruction guides, aka ‘surely there must be an easier way of doing this’.
Post Reply
Sd1tr7
Rust Hunter
Posts: 100
Joined: 26 Dec 2015 23:26
Location: Derbyshire

Body/ pannel seams

Postby Sd1tr7 » 20 Feb 2019 19:45

Tr7 body pannel seam help
What’s the best idea to help with body seam problems ( paint cracks etc)
Sd1tr7

Beans
TRemendous
Posts: 7788
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:

Re: Body/ pannel seams

Postby Beans » 23 Feb 2019 23:20

1. On a standard car use proper seam sealant on all exposed seams before final painting (so over primer)
2. Use an anti chip coating for all areas exposed to direct contact with road debris.
3. Can't advise on products as the local supplier I use won't be available in the UK.
4. I always seal some of the visible seams with black sealant. No chance of cracking paint and looks much neater i.m.h.o.

1.
Image

2.
Image

3.
Image

4.
Image
Image
1976 TR7 FHC (currently being restored ...)
1980 TR7 DHC (my first car, a.k.a. Kermette)
1981 TR7 FHC (Sprint engined a.k.a. 't Kreng)

http://www.tr7beans.blogspot.com/

darrellw
Swagester
Posts: 559
Joined: 25 May 2011 18:44
Location: USA
Contact:

Re: Body/ pannel seams

Postby darrellw » 24 Feb 2019 01:12

Beans wrote:4. I always seal some of the visible seams with black sealant. No chance of cracking paint and looks much neater i.m.h.o.


Beans,

That is a really good idea. That seam between the front wing and headlight panel can be a problem area!
Darrell Walker
66 TR4A IRS-SC CTC67956L
81 TR8 SATPZ458XBA406206
Vancouver, WA, USA

Sd1tr7
Rust Hunter
Posts: 100
Joined: 26 Dec 2015 23:26
Location: Derbyshire

Re: Body/ pannel seams

Postby Sd1tr7 » 05 Mar 2019 18:51

Nice one good idea
Might try it
Thank you
Steve

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests

cron