Page 1 of 1
window mechanism replacement
Posted: 01 Nov 2014 15:13
by Skyliner
I removed everything the doors several years ago when I repainted the car, and have been incapacitated until now. Today while I attempted to replace the window and all related parts I have a piece that I can't identify where it goes. It is 4 inches wide and 3 and 1/2 inches talk with a 45 degree bend, and it has two holes 2 and 1/2 inches apart. I have not tried to post pictures yet so hope this description helps.
Thanks,
Gary
Posted: 01 Nov 2014 15:25
by Peter Nuss
It's the backing plate for your side view mirror. It should also have two welded nuts on it.
TR8
Posted: 01 Nov 2014 15:35
by jclay (RIP 2018)
It is the window stop. Mounts near the top of the door and keeps the window from being rolled up to high. Only fitted on DHCs.
OK, I agree with Peter. It goes inside the door at the top near the fixed window light.
Clay
[url="http://www.jclay.me/"]My Triumph Site[/url], [url="http://www.triumphtechnical.me"]Technical Stuff[/url], [url="https://docs.google.com/folder/d/0B8MWEvqOpX3udEF4SmFQUW9RS09hbU5uNW5Wd0xrUQ/edit"]My Public Folder[/url],
Posted: 01 Nov 2014 18:35
by Skyliner
Peter and JC, thanks for info..
Gary