tr7triumph.com

Copied from a mate of mines posting on another forum:

My mate has a problem, he has an SD1 sender unit and internal fuel pump but he doesnt have the wire that goes between the two.
Is it a special type of wire...we thought it should be because of the fuel melting the insulation?
anyone any ideas?

Can you help?

<b>FOR SALE!!!!Purple 2.0 Litre DHC Grinnall</b>
Red 4.0 Litre V8 DHC Grinnall (with huuuuuge arches...!)

Hi Wayne,
I dont beleive that special wiring is required, BMW E39 (5 series)this is a common failure point on them, the connector breaks off the wiring and have replaced a few over the years with no repeated failure or worse a fire [:0]
Try these guys i have used them with all the wiring on my V8 conversion-

http://www.autoelectricsupplies.co.uk/

Or these guys on this SD1 forum-

http://www.roversd1club.net/forum/default.asp

Cheers John

LIVE LIFE A QUARTER OF A MILE AT A TIME!
1979 3.5 FHC(STATUS PENDING!!)

1982 2.0 DHC NOW A 4.6,ON THE ROAD NOW KICKING AR5E !!!!
Read My Blog http://www.waringstowntr7s.co.uk/blogs/ ... hp/John215