Page 1 of 1
CONVERTIBLE DOOR APERTURE SEAL ANYONE GOT A SPARE
Posted: 10 Oct 2008 19:34
by tr7inc
Hi guys, just wondered if any of you out there had a spare convertible door aperture seal that you would sell , for the drivers side of my 7?
Many thanks
Steve
Steve
Posted: 11 Oct 2008 02:03
by FI Spyder
I believe new ones are slightly different. If no luck from this forum you might get used one from Robsport or S&S.
TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra
Posted: 11 Oct 2008 05:59
by tr7inc
Many thanks Spyder, ive tryed one or two on ebay that had 7's breaking in the past, you know the sort because it wasnt a big enought piece they couldnt be bothered to get back to you, i looked at them at Rimmers but im sorry but i aint paying £28 for a piece of rubber, so i'll try Robssport or S+S.
Many thanks again
Steve
Posted: 14 Oct 2008 05:26
by cliff
I have not checked this out yet but my rumor source has hinted that Hyundai Excel door seals are very similar to those of the TR7/8. If so the rubber should be much fresher and somewhat easier to come by.
Cliff
Posted: 14 Oct 2008 07:25
by tr7inc
Many thanks Cliff, i'll have a look on the net see what i can find.
Steve
Posted: 15 Oct 2008 17:12
by CTHelt
If you have not found a seal yet try Macgregor British Car Parts (Canada). 905-627-4006. It looks very good and they can send you a sample if you like.
Posted: 15 Oct 2008 17:17
by tr7inc
Many thanks as of yet ive had no luck in finding one, i'll try Robsport or S+S too.
Steve
Posted: 15 Oct 2008 20:58
by gaz
Posted: 16 Oct 2008 06:51
by tr7inc
i Gaz, many thanks i think ive got that one sorted now, but thanks again
Steve
