How to get your turn signals to cancel:
Posted: 29 Sep 2008 20:21
My turn signals would not cancel after turning. Sometimes I would not even notice because the car is so loud and the top is down half the time. Now it cancels perfectly and this is the fix:
Make sure the steering wheel is oriented in the straight ahead position. Remove 9 screws which hold the steering wheel. Remove nut with 27mm socket. Use a small gear puller to remove the steering wheel hub. Look on steering wheel hub for a small triangle(arrow). Point this arrow close to the turn signal stalk. Keep in mind the orientation of the top hole(for steering wheel orientation). Reassemble the hub and steering wheel.
Randall
Make sure the steering wheel is oriented in the straight ahead position. Remove 9 screws which hold the steering wheel. Remove nut with 27mm socket. Use a small gear puller to remove the steering wheel hub. Look on steering wheel hub for a small triangle(arrow). Point this arrow close to the turn signal stalk. Keep in mind the orientation of the top hole(for steering wheel orientation). Reassemble the hub and steering wheel.
Randall