tr7triumph.com

Hi all

I have a Midget that has a TR7 rear axle. To make life easier I will be redrilling the front hubs to match the rear PCD.

I also need to use 14" wheels to clear my front brakes.

What options do I have in terms of 14" wheels? I don't particularly want minilites, nor am I keen on the 5 spokers (with black inserts).

Any suggestions?

Thanks
Matt

Woolfies!Woolfies!Woolfies!............Woolfies!(you need all 4!)

(unless you got a Reliant Robin)
See ya. Paul

Matt, if you discount minilites & similar styles, then you don't have a great choice left in 14" (apart from Wolfrace of course!). Revolution wheels come up on Fleabay sometimes as another alternative.

The TR7 PCD is not the most common but if you went to 15" wheels then you could use the alloys off the modern MGF, or those from the Montego or Maestro.

Alternative is to get the wheels you want as blanks & get them drilled to the right PCD (which is 95.25mm)

Tony

<font size="1">1981 2L FHC Cavalry Blue - very original & not rusty!
1980 3.5L V8 DHC Regency Red - on the road again.</font id="size1">

Yes - Wolfrace wheels !

I like compomotives [:D]

Purple 2.0 Litre DHC Grinnal

Anyone got any woolfies for sale then?

Matt

Matt,check out fleabay from time to time,Woolfies are often on there.

I dont like the original center caps 'cos they stick out too much -
the one in the photo is from Minilite,fits a bit tight,but you wont
loose it!

See ya. Paul

this set just got sold recently............
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=007

It rides again

I quite like the look of the GT6 steel wheels. Are they the same PCD as the TR7s?

And do they do them in 14" does anyone know?

Thanks
Matt

scrub that, I mean TR6 wheels.

This scrapper looks like it has a set of Woolfies on it ..........

http://cgi.ebay.co.uk/The-Triumph-TR7-F ... dZViewItem



Tony

<font size="1">1981 2L FHC Cavalry Blue - very original & not rusty!
1980 3.5L V8 DHC Regency Red - on the road again.</font id="size1">