Anonymous

tr 7 notchy steering

The all purpose forum for any TR7/8 related topics.
Post Reply
bmcecosse
TRemendous
Posts: 2399
Joined: 14 Apr 2007 21:54
Location: United Kingdom
Contact:

Postby bmcecosse » 30 Dec 2007 21:41

When the steering goes to 'full lock' it goes kind of 'over centre' - this to get a good turning circle. Does the car run straight with 'hands off' ok ? Could be your steering rack is not exactly centred - and so the wheels can turn a little bit more one way than the other. Otherwise - could be the tracking is not set correctly - or more worryingly - the suspension strut may not be sitting at the correct angle - possibly due to worn bushes - or because of misalignment problems with the strut top mounts. View the car from straight-on, on a flat road. Do both wheels appear to be just very slightly leaning inwards at the top ? If one is more than tother - it needs investigation.

ImageImage

Hasbeen
TRemendous
Posts: 6474
Joined: 28 Apr 2005 12:32
Location: Australia
Contact:

Postby Hasbeen » 30 Dec 2007 23:21

Have you looked to see if one of the tyres is rubbing on the body
work, when on full lock?

Hasbeen

john 215
TRemendous
Posts: 6867
Joined: 03 Dec 2006 17:12
Location: United Kingdom
Contact:

Postby john 215 » 30 Dec 2007 23:26

Hi Steve,
Have you checked for even tyre wear? and pressures why you are at it? Hit any curbs or such like? As Bmcecosse say's check if anything looks wrong and then jack it up and check for play anywhere on the front suspesion/steering, MAKE sure you use a suitable jack and AXLE STANDS,poss anti-roll bar bushes wear they go through the bottom arm,or inner bush bottom arm,any knocking noises present?
Cheers John.

LIVE LIFE A QUARTER OF A MILE AT A TIME!
1979 3.5 FHC(STATUS PENDING!!)
Image
1982 2.0 DHC Soon to be a 4.6 fire breather!!
Read My Blog http://www.waringstowntr7s.co.uk/blogs/ ... hp/John215

Post Reply

Who is online

Users browsing this forum: No registered users and 115 guests