Price for factory alloys?

EntonoX · Postby **EntonoX** » 22 Nov 2007 19:55

The more the better, right? [:o)]

TR7, ACG 2700L

Odd · Postby **Odd** » 23 Nov 2007 03:12

Thanks Paul.

Hasbeen · Postby **Hasbeen** » 23 Nov 2007 04:06

I have 4 factory mags, holding my spares car off the ground. I would
happily swap them for any old junk, which would do the same job. I
suppose Oz is a little far away for most of you.

I also have one supporting the floor in the 8s boot/trunk. Its no
use as a spare, as it won't fit over the brakes at either end. Now
the car is back in full use, I must get serious about replacing that
one.

At least the one in the 7s boot can be used, provided I have some
of the correct wheel nuts with me, [I normally do]. The nuts in
my "Performance" wheels fitted, are not suitable for the factory
wheels.

Hasbeen

omichaelshar · Postby **omichaelshar** » 23 Nov 2007 06:11

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by EntonoX

The more the better, right? [:o)]
<hr height="1" noshade id="quote"></blockquote id="quote">

I agree with the sentiment, but a little sad that the orange crowd now outnumbers the aussies.

BTW, I have only ever seen 1 wedge in Aus that has steel wheels and hub caps. Seems we got alloys on almost all indents.

Consequently I have 3 or 4 sets that I will eventually want to get rid of. Odd, et al, if you are prepared to wait until mid next year (which is approx the point in the schedule where I will be ready) you can have them for the cost of shipping and consideration for my crating time.

Of course, my schedule keeps slipping so it may be later in 08...

Owen

paul w · Postby **paul w** » 24 Nov 2007 14:56

Odd,Entonox.Bob of Bobsport says he has plenty of used alloys,priced at Â£28 each.Shipping to Holland is Â£30,and to Sweden is Â£50.Give Rob and Simon a call on 01763 262263 and they will help you further.Hope that helps you both.

See ya. Paul

Odd · Postby **Odd** » 24 Nov 2007 17:10

Thanks Paul
I'll do that.

lebochet9 · Postby **lebochet9** » 25 Nov 2007 18:43

Hehe, I'm selling a set on Ebay right now... [;)]Item number: 200175920009. Only 2 bids, but 11 watchers, so I'm hoping for a bit more than 30 quid tho!!

john 215 · Postby **john 215** » 25 Nov 2007 23:01

Hi,
Good article in this edition of TR Driver mag showing all the different 13" wheels available,well worth a look and read as normal!Also worth a read is an article in the latest TR Registar mag detailing the working of the 'Low Coolant' warning lamp cicuit.Easy to understand, must be i do!!The cover is easy on the eye as well! [;)]
Cheers John.

LIVE LIFE A QUARTER OF A MILE AT A TIME!
1979 3.5 FHC(STATUS PENDING!!)

1982 2.0 DHC Soon to be a 4.6 fire breather!!
Read My Blog http://www.waringstowntr7s.co.uk/blogs/ ... hp/John215

Odd · Postby **Odd** » 26 Nov 2007 10:25

<blockquote id="quote">quote:<hr height="1" noshade id="quote"> The cover is easy on the eye as well! <hr height="1" noshade id="quote"></blockquote id="quote">
Sure is!
Not totally PC though... ;-)

Lebochet9
- If you hadn't written 'Collection only!' you'd have my interest...
And I'd expected to have them shipped without tyres
- since shipping second hand tyres around the EU borders to the insane in my opinion...

Anonymous

Price for factory alloys?

Who is online