Anonymous

Prop shaft flange torque

The all purpose forum for any TR7/8 related topics.
Post Reply
jimbray
Wedgling
Posts: 11
Joined: 12 Oct 2015 16:19
Location: kent

Prop shaft flange torque

Postby jimbray » 16 Jun 2023 07:07

Hi all
I'm trying to find the torque setting for the nut that holds the prop flange on to the diff pinion, I've found the setting for gearbox end (120lb/ft) but can't find the diff end.
P.S. it's a 5 speed and it's the outer nut not the preload nut.
TIA
Jim

darrellw
Swagester
Posts: 559
Joined: 25 May 2011 18:44
Location: USA
Contact:

Re: Prop shaft flange torque

Postby darrellw » 16 Jun 2023 10:58

According to the TR8 ROM:

Pinion flange to pinion . . . . 16 mm Nyloc nut . . . . . 160 Nm 120 lbf ft
Darrell Walker
66 TR4A IRS-SC CTC67956L
81 TR8 SATPZ458XBA406206
Vancouver, WA, USA

jimbray
Wedgling
Posts: 11
Joined: 12 Oct 2015 16:19
Location: kent

Re: Prop shaft flange torque

Postby jimbray » 16 Jun 2023 13:16

Thanks Darrell I thought it might be the same as the gearbox end but wasn't sure.

Post Reply

Who is online

Users browsing this forum: No registered users and 31 guests