Anonymous

Seat Runners - Movement & Noise

The all purpose forum for any TR7/8 related topics.
Post Reply
busheytrader
TRemendous
Posts: 3145
Joined: 14 Oct 2007 17:49
Location: United Kingdom
Contact:

Seat Runners - Movement & Noise

Postby busheytrader » 08 May 2022 12:56

This isn’t a problem with the passenger seat, so assume it’s a wear and tear issue.

There’s a just perceptible rocking in the Driver’s seat runners accompanied by a squeak. A bit annoying when getting in the car and driving over speed bumps. Both disappear when I gently push down on the fore / aft adjustment bar under the seat. It feels like a spring has either weakened or possibly broken. It still occurs if I move the seat further backwards or forwards to another position.

Has anyone else come across this before I start taking things apart?

Thanks

Rich K
Wedge Pilot
Posts: 291
Joined: 08 Aug 2015 18:04
Location: Worcester, United Kingdom

Re: Seat Runners - Movement & Noise

Postby Rich K » 08 May 2022 20:29

Hi, obvious and easy one to check would be the tightness of the four set screws that hold the seat assembly to the floor. Beyond that I would think it’s possibly a little wear in the seat runner mechanism which relies on small ball bearings for smooth operation that need greasing every so often. I have even experienced one of the ball bearings actually coming out of it’s track in the past. Might be best to take the seat out in order to get a better look at what’s going on and allow you to grease the bearings etc.
Cheers,
Rich.
1980 TR7 drophead now repainted and started refitting plus V8 upgrade
1977 TR7 fixedhead awaiting restoration
1981 TR7 drophead bodywork and mechanicals now done, completing trim currently.
Ford Ranger Wildtrak
Jaguar XKR Supercharged

busheytrader
TRemendous
Posts: 3145
Joined: 14 Oct 2007 17:49
Location: United Kingdom
Contact:

Re: Seat Runners - Movement & Noise

Postby busheytrader » 08 May 2022 21:28

Hi Rich,

The high tensile bolts to the floor are tight. The runner mechanism moves freely. I’ll have to remove the runners from the seat for a closer look.

Rich K
Wedge Pilot
Posts: 291
Joined: 08 Aug 2015 18:04
Location: Worcester, United Kingdom

Re: Seat Runners - Movement & Noise

Postby Rich K » 08 May 2022 22:13

The only other thing that comes to mind is the seat frame itself, which in my experience can fatigue and crack in the area close to the tilt mechanism. I had this happen on my old fixed head whereby the seat back started to rock slightly before the frame broke on one side and required welding back up.
1980 TR7 drophead now repainted and started refitting plus V8 upgrade
1977 TR7 fixedhead awaiting restoration
1981 TR7 drophead bodywork and mechanicals now done, completing trim currently.
Ford Ranger Wildtrak
Jaguar XKR Supercharged

busheytrader
TRemendous
Posts: 3145
Joined: 14 Oct 2007 17:49
Location: United Kingdom
Contact:

Re: Seat Runners - Movement & Noise

Postby busheytrader » 09 May 2022 10:25

Yep, happened to my pal’s 1980 FHC

FI Spyder
TRemendous
Posts: 8915
Joined: 03 Jul 2006 19:54
Location: Canada

Re: Seat Runners - Movement & Noise

Postby FI Spyder » 09 May 2022 14:56

The seat frame crack cab be welded with a gusset so it is stronger than ever. It is caused by, over the years, forgetting the keys in your pocket, then rather than getting out remove them, you straighten out so you have access to them. That puts a strain on the seat back that it wasn't designed for. I've done it myself over the years but always being cognizant of the force that could be placed on the seat back and consciously minimizing that.
- - -TR7 Spider - - - 1978 Spitfire- - - - 1976 Spitfire - - 1988 Tercel 4X4 - Kali on Integra - 2013 Volt - Yellow TCT

busheytrader
TRemendous
Posts: 3145
Joined: 14 Oct 2007 17:49
Location: United Kingdom
Contact:

Re: Seat Runners - Movement & Noise

Postby busheytrader » 26 Jun 2022 15:20

I always thought I had a spare pair of seat runners hidden somewhere in the garage. Someone was selling them for a fiver at a car meet before Y2K since they’d fitted MX5 seats.

Well I found them, covered in cobwebs and the like. The springs seem to engage the ratchet teeth far stronger than those currently in the wedge, with no slop, so I’ll be changing them over shortly to see if that’s the cause.

Image

Image

Beans
TRemendous
Posts: 7788
Joined: 15 Mar 2006 19:29
Location: Netherlands
Contact:

Re: Seat Runners - Movement & Noise

Postby Beans » 26 Jun 2022 19:43

And check the bearing balls in the slide mechanism move freely
Image
1976 TR7 FHC (currently being restored ...)
1980 TR7 DHC (my first car, a.k.a. Kermette)
1981 TR7 FHC (Sprint engined a.k.a. 't Kreng)

http://www.tr7beans.blogspot.com/

busheytrader
TRemendous
Posts: 3145
Joined: 14 Oct 2007 17:49
Location: United Kingdom
Contact:

Re: Seat Runners - Movement & Noise

Postby busheytrader » 26 Jun 2022 23:20

Thanks Beans. Yes the balls are moving freely. The change has worked.

The previous release bar wasn’t strongly sprung enough allowing perceptible movement of the runners.

Post Reply

Who is online

Users browsing this forum: No registered users and 37 guests