Anonymous

Seat fittings

The all purpose forum for any TR7/8 related topics.
Post Reply
jimbray
Wedgling
Posts: 11
Joined: 12 Oct 2015 16:19
Location: kent

Seat fittings

Postby jimbray » 01 Nov 2021 13:40

Does anybody have a picture of the seat to floor fittings , particularly where the plastic and metal stop/guides go thanks in advance.

Rich K
Wedge Pilot
Posts: 277
Joined: 08 Aug 2015 18:04
Location: Worcester, United Kingdom

Re: Seat fittings

Postby Rich K » 02 Nov 2021 10:10

Hi,

I don’t have pictures as the seats are not yet refitted in my car, however the parts diagram may help. The thick washer (WM809) goes between the floor and the seat runner assembly on the outside rear position. The metal seat runner stop (ZKC1620) goes between the floor and seat runner assembly on the inside rear position. ZKC1620 and washer WP181 from memory are welded together as one item on my car; not sure if all are like this. The rectangular spacers sit on top of the seat runner assembly where the star drive bolts go through the assembly into the floor. The plastic pieces were only fitted to late cars as far as I am aware, one each side at the front, over the carpet where the floor meets the transmission tunnel. These are fixed with self tapping screws through the carpet into the floor.

Hope this is helpful.
Cheers, Rich.
Attachments
59570A91-E37F-4444-8267-0A2DF74E6C73.jpeg
59570A91-E37F-4444-8267-0A2DF74E6C73.jpeg (104.62 KiB) Viewed 3239 times
1980 TR7 drophead now repainted and started refitting plus V8 upgrade
1977 TR7 fixedhead awaiting restoration
1981 TR7 drophead bodywork now done, mechanicals next then final paint
Ford Ranger Wildtrak
Jaguar XKR Supercharged

jimbray
Wedgling
Posts: 11
Joined: 12 Oct 2015 16:19
Location: kent

Re: Seat fittings

Postby jimbray » 02 Nov 2021 11:39

Thanks Rich that's great ,I took them out years ago and couldn't remember what went where .

Post Reply

Who is online

Users browsing this forum: No registered users and 109 guests

cron