tr7triumph.com

The wiring to the seat belt switches under my passenger seat have been cut and bodged up. Does anyone know the correct wiring for these? I have two light green/orange wires, two black/orange wires and one black wire.
For the drivers seat I have an original connector with one light green/orange wire and one black wire which looks like it connects to the seat belt. There's nothing for the seat pad switch on this side.

Cheers, Andy.

[img][IMG]http://i473.photobucket.com/albums/rr92/REPLIC8-2008/DSCN0639_zpsf5bcafff.jpg[/img][/img]

[img][IMG]http://i473.photobucket.com/albums/rr92/REPLIC8-2008/DSCN0640_zpsf9756adc.jpg[/img][/img]



Andy
1981 TR7 FHC

As far as I know/remember there is no seat pressure pad on the drivers side,Steve..

There is on N/A cars. Is this something that is different between RH and LH drive cars? Since the seats are handed maybe they never bothered to put pressure pads in RH drive cars as 9 out of 10 went to LH drive places.

- - -TR7 Spider - - - 1978 Spitfire- - - - 1976 Spitfire - - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra - Yellow TCT