Page 1 of 1

Tyre sizes

Posted: 03 May 2010 19:56
by prlee
Probably been answered before, but I am wondering what are the tyre sizes you can fit to the standard TR7 alloys. I dont want to affect the speedometer readings.

Pete
81 DHC (Undergoing minor body repair)
79 Spitfire (Current Main drive)
Image Image Image

Posted: 03 May 2010 21:22
by FI Spyder
I use factory standard size 185 70. Look pretty good.

Image



TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra
Image

Posted: 03 May 2010 21:27
by trv8
Standard tyre sizes are 185/70 x 13.



Oops! Too slow, Spyder beat me to it [:I].

Posted: 03 May 2010 21:49
by jtmco
What brand of tires do people run in the standard size? When I look, I find very limited options (Kumho, Sumitomo, 1 Firestone, 1 BF Goodrich (expensive).

I hope this is still on topic.

Jim

Posted: 03 May 2010 21:53
by Beans
185/70R13 indeed is the only readily available size nowadays for road legal tyres.

As far as I know 195 section tyres aren't available for R13 wheels,
and 205 tyres are really to wide for 5.5Jx13 wheels ...

Check manufacturers specifications for minimum rim width.

<center>Image
<font color="blue"><i>1980 TR7 DHC (my first car, currently being restored)
1981 TR7 FHC Sprint (better known as 't Kreng)</font id="blue">
<b>[url="http://www.tr7beans.blogspot.com/"]<u><b><font size="2"><font color="red">My Weblog</font id="red"></font id="size2"></b></u>[/url]</b></i></center>

Posted: 03 May 2010 21:55
by Beans
<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by jtmco</i>

What brand of tires do people run in the standard size? ... I find very limited options <hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Continental, Avon, Michelin and Yokohama (to name a few) all supply decent 185/70R13 tyres.

<center>Image
<font color="blue"><i>1980 TR7 DHC (my first car, currently being restored)
1981 TR7 FHC Sprint (better known as 't Kreng)</font id="blue">
<b>[url="http://www.tr7beans.blogspot.com/"]<u><b><font size="2"><font color="red">My Weblog</font id="red"></font id="size2"></b></u>[/url]</b></i></center>

Posted: 05 May 2010 15:39
by bahbzilla
I know of a couple folks running Sumitomo HTR 200 205/60 R13 who like them alot,and the outside diameter is very close to stock. $56 a piece at Tirerack.com. I hope to be ordering a set soon...

1980 TR7 DHC
Image

Posted: 05 May 2010 16:33
by FI Spyder
I use Kumho tires. No visible wear on them yet. Sticks like glue whether I'm yanking it around a turn or round a tight traffic circle. Good balance when doing a hard turn in intersection with standing water on road. A large part of that is the handling of the car. I can (have) lock(ed) them up in wet and dry but my brakes work pretty good.



TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra
Image

Posted: 05 May 2010 17:36
by bahbzilla
There is an article in the Winter 2005 issue of British Motoring with a lot of useful wheel and tire sizing info in general and specific to TR7/8's...

http://www.britishmotoring.net/Archives/2005_Winter.PDF

1980 TR7 DHC
Image

Posted: 05 May 2010 18:08
by REPLIC8
<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">As far as I know 195 section tyres aren't available for R13 wheels,
and 205 tyres are really to wide for 5.5Jx13 wheels ...<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

My cars been run on 205/60/13 tyres for over 20 years with no problems.

Andy
1981 UK SPEC TR8
Image Image

Posted: 05 May 2010 19:02
by prlee
Thanks guys, I asked because the standard size seems a little non standard stock these days. So the 205/60 is an alternative which could improve handling as well.

Good info from the article.

Glad to see the site back, what happened?

Pete
81 DHC (Undergoing minor body repair)
79 Spitfire (Current Main drive)
Image Image Image

Posted: 05 May 2010 20:53
by Beans
<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by REPLIC8</i>

My cars been run on 205/60/13 tyres for over 20 years with no problems<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
I just stick to the factory recommended rim width with tyres ...

<center>Image
<font color="blue"><i>1980 TR7 DHC (my first car, currently being restored)
1981 TR7 FHC Sprint (better known as 't Kreng)</font id="blue">
<b>[url="http://www.tr7beans.blogspot.com/"]<u><b><font size="2"><font color="red">My Weblog</font id="red"></font id="size2"></b></u>[/url]</b></i></center>

Posted: 06 May 2010 01:22
by silverseven
<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by REPLIC8</i>

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">As far as I know 195 section tyres aren't available for R13 wheels,
and 205 tyres are really to wide for 5.5Jx13 wheels ...<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

My cars been run on 205/60/13 tyres for over 20 years with no problems.

<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">


I too am running 205-60-R13'S with absolutely no rubbing problems or issues with wear....


Personally I like he heftier look [:D]

Image

Ron.
Image ImageImage