Page 1 of 1

Rheostat wiring

Posted: 15 Mar 2010 19:24
by nick
The panel illumination rheostat has four polls. The wiring diagram shows a red and a red/white wire going to the rheostat but it does not show which polls they attach to. Also, I think I had a black wire attached as well which is not shown in the diagram. Can someone clue me in on the correct wiring for the rheostat?

Image
nick
'79 TR7

Posted: 15 Mar 2010 19:43
by FI Spyder
Two are common with other two so you only use two. No black wire as the rheostat is in series to dash wiring and not grounded.

Image



TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra
Image

Posted: 16 Mar 2010 03:07
by nick
Thanks for the pic. The black wire turned out to be the ground for the cigar lighter. Putting that on a rheostat post will blow a fuse. Not a good idea.

Image
nick
'79 TR7