Page 1 of 1

Brake caliper interchangeability

Posted: 18 Feb 2010 19:11
by MrT
Just had a thought - are MGB brake calipers the same as TR7 brake calipers?

Dale

Image
Austin A60 pickup
Triumph TR7
Yamaha SRX-6 (x2)
Ford Maverick
Fiat Idea

Posted: 19 Feb 2010 02:10
by Rich in Vancouver
Nope![:(]

1975 TR7 ACL764U
Image

Posted: 19 Feb 2010 05:35
by busheytrader
Morris Marina[:0]

Image

TR7 V8 DHC Jaguar Solent Blue. 9.35cr Range Rover V8, Holley 390cfm, JWR Dual Port, 214 Cam, Lumention, Tubular Manifolds, S/S Single Pipe Exh, 3.08 Rear, 200lb Spax & PolyBushes all round, Anti- Dive, Strut-Top Roller Bearings, Capri Vented Discs & Calipers, Braided Hoses, 4 Speed Rear Cylinders, Uprated Master Cylinder & Servo, AT 5 Spokes and Cruise Lights, S/S Heater Pipes, Replacement Fuel Tank. No Door Stickers. Mine since July 1986, V8 from 1991

Posted: 19 Feb 2010 07:52
by MrT
Good! That's the answer I wanted anyway[:)]

I've listed a pair of brand new MGB calipers on eBay, then thought maybe I shouldn't in case they might be useful as spares for the TR7, but to be honest, I could do with the cash instead anyway...

Thanks,

Dale

Image
Austin A60 pickup
Triumph TR7
Yamaha SRX-6 (x2)
Ford Maverick
Fiat Idea