Nuts!
Posted: 23 Nov 2009 18:15
I have purchased some whited spoked steel wheels for the Victory fron good old ebay. The pcd was correct but the stud holes were a tad too small so I have had them drilled out a little. These are now fitted with new tyres and back on the car[:D].
The centre hole is about right too but the wheel nuts were not good.. the wolfrace ones that came off are sleeved for Wolfrace, standard TR7 ones are too big and have a flat inner face which does not locate the wheel. I bought new "acorn" wheel nuts from a specialist but they don't fit the thread.[:(]
Can anyone tell me thr thread on a 1976 USA spec TR7?.. Please
Steve
<b><font color="blue">http://www.croyde-bay.com/triumph.htm</font id="blue"></b>
<b><font color="blue">croydebay@aol.com</b></font id="blue">
The centre hole is about right too but the wheel nuts were not good.. the wolfrace ones that came off are sleeved for Wolfrace, standard TR7 ones are too big and have a flat inner face which does not locate the wheel. I bought new "acorn" wheel nuts from a specialist but they don't fit the thread.[:(]
Can anyone tell me thr thread on a 1976 USA spec TR7?.. Please
Steve
<b><font color="blue">http://www.croyde-bay.com/triumph.htm</font id="blue"></b>
<b><font color="blue">croydebay@aol.com</b></font id="blue">