Kenlowe fan wiring

[UKPhilTR7]

For god sake man let it go!!! I did not put that comment on THIS POST and I wired it up to the radio feed after talking to Robsprt direct. Gosh you do get rather offended if people do not do as you say!!

If you could stop putting any comments on my threads, I would much appreciate that as I find your wording and terminology annoying. I never claim to be an expert, so that is why I use this site for information, but really do not want any information that you can give!!

I feel you will want to reply to my comments, but would suggest that you email me direct as I am sure that other forum users do not want to read the replies of two people who obliviously have a conflict of personalities!! Also this is going away from providing macmattom with help.

[Rust Restorer]

<blockquote id="quote"><font size="1" face="Century Gothic, Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by ngtf</i>

[quote]<i>Originally posted by Rust Restorer</i>

Image Taken from my website, Guaranteed to work as I have 2 cars wired like this.<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Hi Andy, no malice intended. If I had known the owner I would have given credit where it's due. I just new Dad used this to wire mine and thought it would help Mac.

All the best

Gavin

Eeyore rides again !!

EOR14W - Persian Aqua 2L Dhc, Now rebuilt and looking lovely - Sprint engine now fitted!
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Gavin, no malice taken, its there to help all, just wanted to say it works ok.

Andy
1980 DHC Cashmere Gold
1981 FHC Persian Aqua Blue
www.andys-tr7.co.uk

http://andystr7blog.blogspot.com

[bmcecosse]

Phil - I just try to advise as best I can - sorry if my advice doesn't suit you! Roy

[Tom M.]

My guess is that Phil ran the relay off the radio feed not the fan itself.

If you connected the fan to the radio power lead you would probably blow the fuse immediately.

Tom M.

[bmcecosse]

The feed to the radio is not fused - it comes directly from the aux position on the Ign switch. Hopefully - a relay was used, that was the advice .......