Anonymous

Hand Break / e-brake

The all purpose forum for any TR7/8 related topics.
Post Reply
Adam Parr
Wedgling
Posts: 44
Joined: 08 Jan 2009 06:51
Location: Australia
Contact:
Contact Adam Parr

Hand Break / e-brake

Postby Adam Parr » 25 Feb 2010 13:49

Hi everyone,
does anyone know how to tighten the hand brake of our wedges?

I'm not looking to do a disk conversion i just want to tighten the brake so it will pass road worthy (time constraint).

i want to get my 7 on the road before the 13 of march (its my nanna's birthday and I want to drive it down to Ballina, which is about 2hours dive from where i live)

thanks in advance
Adam [:D]

Image
Top
HDRider
Swagester
Posts: 542
Joined: 23 Jun 2008 15:58
Location: USA
Contact:
Contact HDRider

Postby HDRider » 25 Feb 2010 14:22

If the handbrake lever goes up more than a few clicks chances are the automatic brake adjuster ratchets are installed upside down. I have bought 3 wedges and they all were the same, installed upsidedown.

Edward Hamer
Petaluma CA
Top
jclay (RIP 2018)
TRemendous
Posts: 6027
Joined: 08 Jul 2006 17:13
Location: USA

Postby jclay (RIP 2018) » 25 Feb 2010 14:22

Adam,

I have never done it but I am sure it is in the TR7man.pdf on my download page. Try that.

jclay

[url="http://web.mac.com/jclaythompson/iWeb/Site/Welcome.html"]My Triumph Site[/url], [url="http://web.mac.com/jclaythompson/iWeb/Technical/Intro.html"]Technical Stuff[/url], [url="http://homepage.mac.com/WebObjects/FileSharing.woa/53/wo/HJMTK8gsojtwKleP.1/0.2.1.2.26.31.97.0.35.0.1.1.1?user=jclaythompson&fpath=Triumph_Articles&templatefn=FileSharing4.html"]Download Page[/url]
Top
jclay (RIP 2018)
TRemendous
Posts: 6027
Joined: 08 Jul 2006 17:13
Location: USA

Postby jclay (RIP 2018) » 25 Feb 2010 14:26

Image

Adjustment on this arm.
Image

[url="http://web.mac.com/jclaythompson/iWeb/Site/Rear%20Brakes.html"]Rear Brakes[/url]

jclay

[url="http://web.mac.com/jclaythompson/iWeb/Site/Welcome.html"]My Triumph Site[/url], [url="http://web.mac.com/jclaythompson/iWeb/Technical/Intro.html"]Technical Stuff[/url], [url="http://homepage.mac.com/WebObjects/FileSharing.woa/53/wo/HJMTK8gsojtwKleP.1/0.2.1.2.26.31.97.0.35.0.1.1.1?user=jclaythompson&fpath=Triumph_Articles&templatefn=FileSharing4.html"]Download Page[/url]
Top
Adam Parr
Wedgling
Posts: 44
Joined: 08 Jan 2009 06:51
Location: Australia
Contact:
Contact Adam Parr

Postby Adam Parr » 27 Feb 2010 13:50

Thankyou guys, your knowledge and information has been a massive help
Adam

Image
Top
Rich in Vancouver
Swagester
Posts: 781
Joined: 10 Jun 2007 15:20
Location: Canada
Contact:
Contact Rich in Vancouver

Postby Rich in Vancouver » 27 Feb 2010 19:46

If your brakes are adjusted properly at the wheels and your handbrake is still too high there is a cable adjustment under the lever above the driveshaft. Make sure the brakes are good at the wheels before taking up any slack here though.

1975 TR7 ACL764U
Image
Top
FI Spyder
TRemendous
Posts: 8920
Joined: 03 Jul 2006 19:54
Location: Canada

Postby FI Spyder » 28 Feb 2010 05:18

Be careful not to tighten too much. I don't know how many clicks for the TR7 off hand but I decided to tighten up my Toyota's and I wore my brakes out. Turns out it should be set at a sloppy 6 clicks.


TR7 Spider - 1978 Spifire - 1976 Spitfire - 1988 Tercel 4X4 - Kali on Integra - 1991 Integra
Image
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 65 guests