Speaking of parts interchangeability....

[swifty]

I've seen on ebay that the window winders from MGB's are very similar to those on a TR7. Does anyone know if the nice chrome-replacement window winders listed as replacement/upgrades will fit the TR7? Thanks, M.Swift

[jclay (RIP 2018)]

According to Paul_W the window crank handles are the same for MG and Morris Mini and Mini Cooper.

Have fun, drive fast & safe, be kewl,

jclay

[busheytrader]

I can vouch for the classic Mini window winders fitting the 7. We had to buy one for the wife's Mini from Minispares in North London years ago. It was better quality than those in the 7 and cheaper too. So I bought another and swapped them over!

Adam

TR7 V8 DHC Jaguar Solent Blue. 9.35cr Range Rover V8, Holley 390cfm, JWR Dual Port, 214 Cam, Lumention, Tubular Manifolds, Single Pipe Exh, 3.08 Rear, 200lb Spax & Solid Bushes, Anti- Dive, Granada Vented Discs & Calipers, Green Stuff, 4 Speed Rear Cylinders, Uprated Master Cylinder & Servo, AllyCat 5 Spokes. No Door Stickers. Mine since July 1986, V8 from 1991

[swifty]

Excellent, thanks for that, Adam - I shall be buying a set - so much nicer than the nasty plastic ones!

[paul w]

Yup,good ol'B.L. part bin economy!

Classic Mini alloy winder's and door pulls as fitted on Moe and Esther's
TR7. Mini spares centre are ace!

See ya. Paul